Sprinkler Repair
Diagnosis and repair for damaged pop-up spray heads, leaking lines, controllers, valves, wiring, and zone problems.
View sprinkler repair detailsHome › Landscaping › Blowouts & Winterization
Sprinkler winterization helps reduce freeze damage by removing trapped water before Colorado temperatures fall below freezing. Outdoor Legacy uses regulated pressure with the high air volume needed to clear each zone efficiently, through a designated blowout connection suited to the system’s drain configuration.
Shut off the irrigation supply and follow the system- and manufacturer-specific drain procedure. When compressed air is appropriate, connect an adequately sized compressor at the designated blowout connection downstream of the backflow assembly, regulate pressure within component limits, and clear each zone without routing compressed air through the backflow assembly. Drain and protect the backflow assembly separately.
The exact sequence depends on whether the system uses manual or automatic drains and how its backflow assembly, valves, lines, and pop-up spray heads are configured. Trapped water can expand during a freeze and crack lines, fittings, valves, or backflow components.
Schedule winterization before freezing conditions can damage exposed or water-filled components; do not wait for a hard freeze. Timing varies with the forecast, elevation, system layout, and water-provider guidance.
A system-specific process includes:
Outdoor Legacy uses high-volume compressor airflow with regulated pressure matched to the system and its component limits. The connection point, drain type, and zone sequence are adjusted to the property rather than using one setting for every system.
Water left in a system can expand when it freezes and damage sprinkler lines, fittings, valves, pop-up spray bodies, and backflow components. A careful blowout reduces that risk by moving through the zones with pressure appropriate to the system.
No winterization method should be described as a guarantee against every failure. The goal is to clear the system as thoroughly as its layout allows before sustained freezing weather arrives.
Schedule before freezing conditions can damage exposed or water-filled components; do not wait for a hard freeze. Forecast, elevation, system layout, and local guidance affect timing.
Manual and automatic drains may not remove water from every low point, zone, or backflow component. The system layout and manufacturer guidance determine whether compressed-air winterization is appropriate and how it should be performed.
A freeze does not prove that damage occurred. The system can still be evaluated and winterized, then inspected again during spring startup for cracked lines, failed valves, damaged spray heads or nozzles, and backflow problems.
Service Areas
Outdoor Legacy serves homeowners in Centennial, Greenwood Village, Parker, Denver Tech Center, Cherry Hills, and Castle Pines, Colorado.
From spring startup through fall blowout—and from double-pass aeration to landscaping—request the service your property needs.